TSD-HW

Twelve-Seventeen Door (TSD-HW) Hot Water Heated Air Curtains

Hot Water

The TSD is typically used over dock doors, ground level doors or large openings in an industrial environment. All industrial units are direct drive, which avoids misalignment of couplers and outboard bearings and eliminates periodic belt replacement.

At a Glance

Single Incremental Widths

4' to 30'

MAX Installation Height

17'

Heavy Duty Motors

3 HP

Key Design Features

  • All weight bearing structural support is made of formed 11-gauge stainless steel and galvanized steel. Outer casing is constructed of 16-gauge stainless steel.
  • TSD has heavy duty 3 HP Total Enclosed Aire Over (TEAO) motors at 1160 rpm each, 50/60 cycle. Single speed.
  • Galvanized fans.
  • Air intake screen is perforated stainless steel.
  • Access panels for inspection, cleaning or removal of motor blower assembly, without having to lower the unit.
  • High efficiency discharge plenum with directional air foil vane factory set to facilitate deflection of air stream +/- 20 ̊.
  • Includes NEMA 12 control panel with magnetic motor starter, overload relays and control transformer.

Recommended Controls

  • Panel mounted HAND / OFF / AUTO switch.
  • Magnetic Door Switch for activation.

360 View

360 View | TSD-HW - Twelve-Seventeen Door (TSD-HW) Hot Water Heated Air Curtains

Cost Savings Calculator

This tool will help you understand the cost savings you could expect based on the air curtain you select and your input on how and where it will be used.

Calculate Now

Air Curtain Selector

This tool is designed to help you find the best air curtain
for your situation by asking a few basic questions.

Begin
TSD | Performance Table
MODEL Door Width (ft) Nozzle Width (in) Max. FPM at Nozzle Avg. Outlet Velocity FPM CFM at Nozzle Outlet Velocity Uniformity Power Rating (kW) Number of Motors Motor HP mbtu/Hour Temp. Rise (˚F) Weight (lbs)
TSD-1-48HW 4 48 6200 3443 4590 95.1% 2.1 1 3 169 34 416
TSD-1-60HW 5 60 5800 3006 4855 92% 2.1 1 3 185 35 473
TSD-1-72HW 6 72 5900 2891 5579 86.3% 2.5 1 3 201 33 511
TSD-2-96HW 8 96 6200 3443 9180 95.1% 4.2 2 3 357 36 829
TSD-2-108HW 9 108 6200 3200 9445 92% 4.2 2 3 379 37 886
TSD-2-120HW 10 120 5800 3006 9710 92% 4.2 2 3 402 38 942
TSD-2-132HW 11 132 5900 2943 10434 86.3% 4.6 2 3 421 37 981
TSD-2-144HW 12 144 5900 2891 11158 86.3% 5 2 3 474 39 1019
TSD-3-144HW 12 144 6200 3443 13770 95.1% 6.3 3 3 474 32 1242
TSD-3-156HW 13 156 6200 3275 14035 92% 6.3 3 3 578 38 1299
TSD-3-168HW 14 168 6200 3206 14759 86.3% 6.7 3 3 592 37 1337
TSD-3-180HW 15 180 6200 3077 15024 86.3% 6.7 3 3 588 36 1394
TSD-3-192HW 16 192 6200 3029 15748 86.3% 7.1 3 3 651 38 1432
TSD-4-192HW 16 192 6200 3443 18360 95.1% 8.4 4 3 651 33 1655
TSD-3-204HW 17 204 5900 2925 16013 86.3% 7.1 3 3 698 40 1489
TSD-4-204HW 17 204 6200 3314 18625 92% 8.4 4 3 698 35 1712
TSD-3-216HW 18 216 5900 2891 16737 86.3% 7.5 3 3 711 39 1527
TSD-4-216HW 18 216 6200 3259 19349 86.3% 8.8 4 3 711 34 1750
TSD-4-228HW 19 228 6200 3154 19614 86.3% 8.8 4 3 788 37 1807
TSD-4-240HW 20 240 6200 3112 20338 86.3% 9.2 4 3 834 38 1845
TSD-5-240HW 20 240 6200 3443 22950 95.1% 10.5 5 3 839 34 2068
TSD-HW | Mechanical Information Table
MODELOverall
Width (in.)
Nozzle
Width (in.)
Mounting Width
Rear (in.)
Mounting Width
Top (in.)
TSD-1-48HW514849.547
TSD-1-60HW636061.559
TSD-1-72HW757273.571
TSD-2-96HW99.1296.1297.6295.12
TSD-2-108HW111.12108.12109.62107.12
TSD-2-120HW123.12120.12121.62119.12
TSD-2-132HW135.12132.12133.62131.12
TSD-2-144HW147.12144.12145.62143.12
TSD-3-144HW147.25144.25145.75143.25
TSD-3-156HW159.25156.25157.75155.25
TSD-3-168HW171.25168.25169.75167.25
TSD-3-180HW183.25180.25181.75179.25
TSD-3-192HW195.25192.25193.75191.25
TSD-4-192HW195.37192.37193.87191.37